How to Write an Address on an Envelope

Download Article

Download Article

Labeling an envelope incorrectly will slow down the process of getting your letter or card to its intended recipient. An incorrect label could even prohibit your mail from getting to its destination. Follow these steps to learn how to label an envelope and ensure prompt delivery of your outgoing mail.

1. 1

   Position the envelope. Lay your envelope on a flat surface. Situate the envelope so the envelope flap faces down, towards the surface of the table, and the front of the envelope faces up, towards you.

   • The envelope should be oriented long ways left to right, not top to bottom.
   • For example, a standard business envelope measures 4 1/8¨ x 9 1/8¨.^[1]
   • When you begin to label your envelope, the 9 1/8¨ length of the envelope should run from your left to right hand.
   • The front, smooth side of the envelope is where you will write all the information needed to get your envelope to the addressee.

2. 2

   Print your title (Mr., Mrs., Miss, Ms, or title earned in your line of work) and name for the return address. The return address is necessary in the event the mail is undeliverable. If the mail cannot reach its intended destination, the postal service will send it back to you at the location indicated by the return address.

   • The return address is written in the upper-left corner of the envelope and contains three lines of text.
   • The first line will be your title and name. You should write your complete name legal name.
   • For example, you can write "Mr. Jeremy H. Doe", or "General Harry Smith". This way, your mail carrier will be able to recognize your name and deliver it to your mailing address by the name indicated on the return address.

3. 3

   Print your street address. The second line of text in the upper-left corner will include your street address as given to you by the post office.

   • Remember to include your apartment number, if you have one.#
   • If you receive mail at a post-office box, print that on the second line.

4. 4

   Print your city, state, and zip code on the third line.

   • If, for some reason, your city and state information takes up a lot of space (you find yourself writing far out into the middle of the envelope), it is acceptable to write the zip code the fourth line.

1. 1

   Print the title and name of the person to whom the mail is being sent. The mailing address indicates your letter's destination and also include at least three lines of text. The first line will be the title and name of the person to whom your letter will be delivered.

   • Write that person's title and name in the very center of the envelope, i.e., Mr. & Mrs. John Doe, Mrs. Jane Doe, Reverend Sam Holly, General George Patton. Miss or Ms is used for unmarried women. If you do not know a woman's title, then use Ms. It is rude and disrespectful to use Jane Doe, John Doe because it shows a lack of education and respect for others. It does not cost anything to show respect to the person to whom you are writing. You will be writing lines below this title and name, so be sure to start high enough up in the middle of the envelope to leave yourself space.

2. 2

   The "attention" line abbreviation, "ATTN: " is in all capital letters. For example, if you are sending your letter to an individual at a company, start the first line of the mailing address with the name of the company. For example, "Big Corporation X".

   • Write the title and name of the individual to whom you are writing underneath the name of the company with "ATTN: Mr. John H. Doe, Attorney at Law". It is different for titled individuals, for example, Mr. James H. Howard, Secretary of State, or a Director.
   • This helps ensure that your letter will wind up in the correct person's hands instead of getting lost in the company's mail-room. Place: DO NOT OPEN IN MAIL ROOM on the envelope face, or EXCLUSIVE FOR: Director Jeremy A. Applegate.

3. 3

   Know when and how to use the abbreviation "c/o". You may also consider using the designation "c/o" (which stands for "in care of") instead of "Attn:". Use this convention when you are mailing a letter either to a person or business but know that the letter will be handled or delivered by an intermediary.

   • For example, if you are applying for a job, you will want to address your letter to the head of the hiring committee, but the advertisement may include the name of the administrative assistant who handles the applications. In this case, the first line of the mailing address will indicate the name of the head of the hiring committee, and the second line will read "c/o Mr. J. Doe (the administrative assistant)".
   • You may also use "c/o" when you are trying to send a letter to a person whose address you do not have, but when you do have the address of someone you believe will be able to forward the letter.
   • For example, if you do not have the current mailing address of a childhood friend, but do know where her mother lives, you can mail the letter to her mother. The first line will include the friend's name, the second line will read "c/o Mother's Name", and you will then include the mother's address below that.

4. 4

   Write the street address of the recipient. Once you have filled in the name of the letter's recipient, you will print the street address to which the letter will be delivered.

   • Print this immediately below the name. This will be the second or the third line of the mailing address, depending upon whether you had a second line with "Attn:" or "c/o".
   • Be sure to include the complete address, including any relevant apartment or suite numbers.
   • Also be sure to include any directions, such as NW (for northwest); many towns and cities have multiple streets with the same name which are only distinguished by these directionals.^[2]

5. 5

   Write the city, state, and zip code (or postal code) of the recipient. This information is the last line of the address, and appears directly under the street address.

   • If you are sending mail internationally, you will also need to include the country to which your letter is being delivered. This does not need to be included if you are mailing domestically.

6. 6

   Be prepared with more information for military addresses. If you are sending a letter to a military address, be sure to include all relevant information.^[3]

   • This includes the full name of the recipient (including either the middle name or middle initial), the PSC number, unit number, or ship name.
   • Instead of writing the city name, include instead APO (Air/Army Post Office), FPO (Fleet Post Office), or DPO (Diplomatic Post Office).
   • The state should be replaced with AA, AE, or AP.
   • Finally, the zip code should include the full ZIP+4.

1. 1

   Determine the correct postage. Postage is required to send mail through the postal services in most countries. If you are using a standard business envelope, you will most likely only need one stamp to mail your letter.

   • Currently, stamps are $0.55 each. One stamp is sufficient for a letter that does not exceed one ounce in weight.^[4]
   • If your letter weighs more than one ounce, you will either need to affix an additional stamp, or better yet, you should take it to a local post office to be weighed. You can then pay the exact postage needed.
   • You can also calculate your required postage by going to the United States Postal Service's website.

2. 2

   Be aware of different postage rates. Postage rates do change fairly frequently. If you haven't mailed a letter in awhile, the old stamps that you have stashed in the back of your desk drawer may be insufficient.

   • A good way to handle surprise increases in the cost of a stamp is to purchase Forever Stamps. These are non-denominational stamps which once purchased can be used to mail First-Class letters forever—regardless of any subsequent price increases.^[5]
   • Currently, a First-Class Mail Forever Stamp is priced at $0.55. ^[6]
   • Currently, a First-Class Mail International Global Forever Stamp and/or a Postcard Stamp is priced at $1.15.
   • If you send a lot of letters (and you should consider doing so—writing letters is a lost art!), you should definitely stock up on Forever Stamps.

3. 3

   Place a stamp on your envelope. The stamp goes in the upper-right corner of the envelope.

   • Make sure that you do not place your stamp over any part of the mailing address (the mailing address should be centered lower on the envelope, so this shouldn't be a problem).
   • Make sure as well that you do not write over the stamp.
   • Of course, if you do not have stamps, or do not have the correct postage, take your addressed envelope to the nearest post office and they will handle it from there.
   • Double-check that you've included all of the necessary, correct information. You're ready to mail!

Add New Question

• Question

  Where do I place stickers on an envelope I am going to mail?

  

  It depends on the sticker. If the sticker is a post stamp, it will go in the upper right corner. If the sticker contains your address (return label), it will go in the upper left corner. If the sticker is a seal, or just a kid's sticker, you can place it on the back of the envelop, right over the center of the flap.

• Question

  Should I use pen or pencil?

  

  Though it is not strictly required, it is recommended that one use a permanent pen or marker. A pencil may be used, but is not recommended as it can become erased, therefore hindering proper delivery of the parcel. When writing with a marker or felt tip pen, prepare the envelope before inserting the letter so the ink does not bleed onto the letter.

• Question

  Is a zip code the same thing as a postal code?

  

  Yes. The term "zip code" is mainly used in the USA, while the term "postal code" is commonly used in other countries.

• Question

  Where do I put the P.O. Box number on an envelope?

  

  You place it in the same place as the street address. For example: Jane Doe P.O. Box 873 Atlanta, GA 10101

• Question

  What should I do if I put the wrong address on the envelope?

  

  If you have already mailed the envelope, there is nothing you can do; the letter will reach the wrong person. Hopefully, the person will note your return address and send the letter back to you. If you have not yet mailed the letter: take the letter out of the envelope, put it into a new one, and write the correct address on the new envelope.

• Question

  What if I don't know the name of the recipient?

  

  You could use "To Whom It May Concern."

• Question

  When addressing an envelope, do I use single or double spacing?

  

  You only need to use single spacing.

• Question

  Is it okay to leave a personal note such as a quote on an envelope before mailing?

  

  Yes, preferably on the back of the envelope.

• Question

  When do I hyphenate a name?

  

  It depends on what the name is. If there are two last names, and both are commonly used, try [name1]-[name2]. In any other case you don't have to hyphenate name. First names are almost never hyphenated.

• Question

  Why do I need to stamp my envelope?

  

  Mailing a letter is a service like any other. Not stamping a envelope will result in it being returned to the sender.

Show more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

• Write on your envelope with a permanent pen or marker. If you don't use a permanent pen, the mailing address or return address could get smudged or erased, and result in an undeliverable envelope.

Thanks for submitting a tip for review!

• When addressing your envelope, always print with legible handwriting. Don't use cursive.

• When addressing your envelope, you should not include any commas or periods.^[7]

Things You'll Need

• Envelope
• Permanent pen or marker
• Stamp

About This Article

Article SummaryX

To address or label an envelope, first write the return address on the front top left corner by including your name, your street address, and your city, state, and zip code. To write the mailing address, print the name of the person you're sending the letter to in the center of the front of the envelope. Write the recipient's street address on the line below their name. Finally, write their city, state, and zip code on the third line. When you're done addressing the envelope, place a stamp in the upper right corner before sending it to the recipient. To learn about adding the correct postage to your envelope, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 1,765,083 times.

Did this article help you?

How to Write an Address on an Envelope

Source: https://www.wikihow.com/Label-an-Envelope

Share :